Варасто(Varasto) на финландски означава склад.
Това е лесен складов робот, направен да хваща и дърпа обекти. Той използва два големи мотора за да се движи и един среден мотор за хващач. Хващачът е отпред на робота и е направен от две двойно пречупени греди свързани с по едно зъбно колело, което им позволява да хващат обекти.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it.
Инструкции за ЛЕГО Mindstorms EV3 база за робот. Приставката за моторите е доста интересна. Следваме ъглите на ЛЕГО Техник, за да прикрепим моторите. При тази конструкция е малко трудно да се завива наляво и надясно. Но, ако трябва да превъзмогнете толкова високо препятствие, това е един от начините да го направите.
С този робот може да използвате всякакви видове колела - EV3, NXT или други. Няма особено значение.
Виждали ли сте динозавър? Истински ли? Ако ли не, сега ще имате възможност да си построите робот динозавър!
This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions
These are building instructions for Overload Centrifuge training machine built with LEGO WeDo 2.0
This robot extends the Tetrix Box Robot chassis for FTC competitions with an additional arm. The arm could be used for lifting and placing objects and could be quite useful.
There is a special rubber band at the end of the arm, because there are not enough parts in the Tetrix set and we had to use a rubber band. But the principle of the arm is interesting, useful and you should be familiar with it - the arm keeps the motors always in the right orientation.
For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.
(mission descriptions source: https://www.first-lego-league.org/)
This is an pinless robot attachment designed for taking loops. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachment that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com
Хронос означава време на Гръцки.
Колко е часа? Време е да построим готин робот! Този робот е направен да прилича на часовник. Двете му стрелки са свързани към два мотора и са поставени между моторите. Това го прави лесен за сторене, както и ефективен в показването на принципа на работа на часовника.
Примерна програма показваща секундите и минутите от стартирането ѝ може да намерите тук.
Примерна програма предназначена да учи деца да разчитат часовника може да намерите тук.
Това са инструкции за моделите на мисии Swing и Traffic Jam. И двете мисии са в торбичка 9 от комплекта за FIRST LEGO Лига 2019-2020 City Shaper.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Не всички ЛЕГО Mindstorms EV3 роботи трябва да се поставят хоризонтално или вертикално. Възможно е блокът и моторите да се поставят така, че роботът да застане под определен ъгъл.
Това е една много полезна малка конструкция, която може да се използва за база и да бъде надградена, като се поставят ръце, глава или други интересни…. части на тялото на робота.
Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition. The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time
Building instructions for the Pinless Rubber Band Attachment:
This LEGO Mindstorms Attachment has three gears, one frame and two axles. The goal of the attachment is to use the gears to change the direction in which the motion is transferred.
This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.
