Building Instructions -

• Ubuntu

This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

Background

Solar panels in space are a great source of energy for a space station in the inner solar system, but since things in space are always moving, aiming the panels takes some thought.

Mission

Solar panels need to be angled toward or away from you, depending on strategy and conditions.

Scores

• Both solar panels are angled toward the same field: 22 (for both teams)

• Your solar panel is angled toward the other team’s field: 18

• Possible scores: 0, 18, 22, 40 as shown below and seen from above your north border, facing north.

“Your” solar panel is the one on your west end of the table.

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for the 3D Cinema mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Dwell is a car built with a LEGO MINDSTORMS EV3 set. It uses the medium motor for powering the back wheel and one more medium motor for rotating the front wheels and thus turning. Of course, there is a differential at the back.  

This is an pinless robot attachment designed for taking loops. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachment that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com

These are instructions on how to build the:

• Crane

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Winter might be far away or it might just be coming - depending of course on where you are in the world. But you can always spend a few hours having fun with a LEGO Mindstorms Snowmobile. A really challenging construction that requires good preparation, concentration and a lot of efforts to complete. Same is going to the mountain in the winter. But the reward at the end is worth it. 

This is the forth type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

The Swing Game is a SPIKE Prime robot designed as a two-player game. The goal is for both LEGO figures to reach the center of the swing without tipping it over to either side. Each LEGO figure is mounted on a motor connected to a Technic gear rack, allowing it to move along the swing. The motors are controlled separately—one by a color sensor and the other by a Large Motor. If one player moves too far ahead without the other keeping up, the swing will tip... and it’s game over! Good luck, and have fun!

These are building instructions for Overload Centrifuge training machine built with LEGO WeDo 2.0

This LEGO Mindstorms Attachment has three gears, one frame and two axles. The goal of the attachment is to use the gears to change the direction in which the motion is transferred.  

The Chain Monster is one of the coolest Box Robots that we've built. But what is a robot without attachments that can accomplish missions? These here are 3D building instructions demonstrating how the frame for the robot could be built. We've discussed frames in the Box Robots courses for EV3. Take a look at this one. See if it can inspire you to build robots and attachments in certain way to achieve consistent and reliable robot behavior.

This robot attachment in inspired by one of the most interesting missions we've seen at FIRST LEGO League competitions - the Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018 . The attachment demonstrates how you could flip an object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment that could be easily detached after a mission is accomplished. It's built with LEGO Education SPIKE Prime parts and it demonstrates an important principle for building attachments for robotics competitions like FIRST LEGO League/World Robotics Olympiad and others. You move with the robot, you complete the mission and you leave the attachment on the field when the mission is completed. In this way you save time when adding the attachment as it is most of the time pinless and takes a fraction of a second to put it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.