WRO Robot with Large Ball Container
Robot building instructions for a World Robot Olympiad with a large container used for collecting ping-pong balls
- #17
- 09 Dec 2015
- 1
Building Instructions
Filters:
One Attachment to rule them all
Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.
SIngle robot attachment, many points.
- #145
- 22 Oct 2015
Second quick pinless attachment
Another example for a quick pinless attachment build with LEGO Mindstorms EV3 robots.
- #231
- 07 Dec 2014
- 1
Fint, a LEGO Mindstorms EV3 goalkeeper robot
Do you have a friend for a sleepover? This might be the perfect robot for you! It is a football gate, guarded by Fint, the goalkeeper robot. You can control him, by using the remote controller, that consists of two Touch Sensors. Take turns making penalty shots and have a blast with this awesome robot!
What we recommend:
- Using a big LEGO wheel from your set as a football ball.
- If you throw the wheel too fast for the robot to catch, increase the distance between the place you shoot the ball from and the robot.
- #726
- 28 Mar 2019
"Rule the World" 3 fingers hand extending mechanism
This is a very funny robotics hand that you could place on your hand and control with your fingers. Actually quite funny to point at things, to move the three fingers. There are also many things to learn from the gears and its constructions.
It is true that it requires a lot of parts, but its worth it.
- #339
- 24 Aug 2017
FLL 2018: Nightbeast Attachment Run 1
This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge
- #729
- 15 May 2019
The snow walker - LEGO Mindstorms EV3 robot with snowshoes
It kind of looks like an Inuit. But it surely walks like one. Most of the time Inuit walk with special boots that allows them to walk on deep snow without getting stuck. This robot walks in the same way. It has large feet and it moves one after the other.
- #579
- 08 Jan 2019
Дистанционно управление от ЛЕГО Mindstorms
Инструкции за дистанционно управление. При него се използва сензор за завъртане, който определя посоката на кормилото, и сензор за допир, който управлява движението. Тук ще откриете инструкции за подходящо шаси.
Дистанционното управление и колата изглеждат заедно така:
- #420
- 01 Jun 2017
Вертикален хващач от ЛЕГО Майндстормс EV3
Този модул е направен като вертикален хващач с готин механизъм за затваряне. Той се задвижва от среден мотор. Хващача се използва в Графът – ЛЕГО Mindstorms робот за сграбчване и разчистване без колела.
- #967
- 24 Jan 2020
Хващач от ЛЕГО Mindstorms
Инструкции за най-обикновения хващач, при който се използва само един голям ЛЕГО EV3 мотор. При него има един неподвижен и един подвижен лост.
- #421
- 01 May 2017
Pinless Rubber Band attachment for solving the Oven
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
- #156
- 19 Jul 2015
- 1
Минтонета - сервиращ волейболен ЛЕГО робот
Минтонета (от англ. Mintonette) е името на една от първите версии на волейбол.
Роботът използва два сензора за допир с които да движи оръдието си наляво и надясно. За да стреля използва цветен сензор. На оръдието си има голям мотор отговорен за стрелбата и среден мотор който мести оръдието.
- #634
- 25 Jan 2019
WRO Robot with Attachment 1
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
- #44
- 19 Dec 2015
- 1
BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot
We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.
- #109
- 22 Feb 2015
Глава на Полярна мечка от ЛЕГО Майндстормс EV3
Това е модул, направен да прилича на глава на полярна мечка, но всъщност може да се използва за много животни. Той използва среден мотор за да захапва и ултразвуков сензор за очи. Кръстили сме го глава на полярна мечка, защото се използва в Полярна Мечка.
- #966
- 24 Jan 2020
Крака за буболечка от ЛЕГО Майндстормс EV3
Това е модул съдържащ две части с по три крака за да направите перфектното си шестокрако насекомо! Двете части се задвижват с по един голям EV3 мотори, които са свързани по различни начини към трите крака за да ги движат точно като истинска буболечка! Можете да комбинирате този модул с други за да построите робот-буболечка.
- #961
- 24 Jan 2020
FLL 2018: Nightbeast Multi-purpose Attachment. M03, M04 and M14
This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange
- #732
- 17 May 2019
WRO Better Robot Attachment
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
- #160
- 16 Dec 2015
- 1
Catapult Frame - LEGO Mindstorms construction for a frame of a catapult
This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3
- #203
- 01 Feb 2015
- 3