
Инструкции за „Box“ робот. Част 2
Втора част на инструкциите за шасито на този състезателен робот от ЛЕГО Mindstorms EV3.
- #242
- 02 Sep 2016
- 1
"I came to browse the Internet and build robots. And I am done browsing the Internet". Many different approaches, principles and directions to constructing robots with detailed building instructions and pictures.
Втора част на инструкциите за шасито на този състезателен робот от ЛЕГО Mindstorms EV3.
Инструкции за построяването на състезателен робот на принципа на “Box” робота. Този робот е построен с ЛЕГО Mindstorms EV3 и може да се използва на състезания като FLL и WRO.
Първа част на инструкциите за построяване на за шасито на състезателния “box” робот. Роботът е доста голям и затова сме разделили инструкциите на две части – за да ви бъде по-лесно да го построите. Това е втората част.
Този робот е построен от ЛЕГО Mindstorms EV3, като във втората част се използва допълнителна част за стените.
Това е истински състезателен робот с три сензора за светлина и един сензор за ускорение.
This modification of the box robot contains large wheels. It was specially requested by you and we have it .
Рамка за добавянето на приставки към робота. Когато използвате приставка, добавянето и свалянето на приставки без пинове става много бързо и лесно. Също така може да махнете и цялата рамка.
В рамката са използвани части от ЛЕГО Mindstorms EV3.
Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.
When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.
Build with LEGO Mindstorms EV3 parts.
Инструкции за конструиране на количка от Лего, която може да изтрелва 40мм пластмасови топки за пинг понг. Роботът се задвижва от два големи EV3 двигателя, а приставката, изстрелваща топките, от среден EV3 мотор. Роботът може да носи до 6 топки и разполага със сензор за разстояние.
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
Разполагахме с няколко минути преди да започнем да строим друг робот и ни хрумна идеята за този. Ако искате да построите Box робот, но нямате достатъчно части, това е една добра конструкция, с която може да се упражнявате. При нея има рамка и три мотора, като може да добавите и приставки.
Building instructions for a robot for the World Robotics Olympiad Sputnik competition. This is the light version without the lift at the top.
We have to admit. This is quite an interesting missions. There is a Manhole cover and it must be turned upside down. Well, the robot must turn it. Again LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro is used as a base for the Robot.
Страшно много обичаме животните, нали? Но понякога е трудно да си имаме кученце за домашен любимец. Представяме ви Кученце робот (да чуем вашите аплодисменти). То притежава някои от чертите на истинското кученце - малко е, може да ви следва навсякъде благодарение на ултразвуковия сензор, както и може д лае (стига да го програмирате). Следвайте инструкциите. Може да го построите вкъщи или в час.
A simple active attachment that could be added to the Box Robot Chassis.
Building instructions for the LEGO Mindstorms EV3 robot used for accomplishing WRO 2014 mission. It is the full robot with the lift at the top
Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover.
The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.
The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.
Probably the largest multi-purpose FLL attachment at FLLCasts. These attached is doing a number of missions at once. 4 of them. You attach it to the robot and start the program. The robot moves and accomplishes a number of missions using only this attachment. At it also has a lot of parts. It is quite large and you can not build it from a single set. But that's ok because you are preparing for a competition, right?
Building instructions for this LEGO Mindstorms EV3 robot used in the World Robotics Olympiad Junior competition
Building instructions for LEGO EV3 catching robot. It uses a medium motor to drive system of gears, which is used for catching objects. It, also, has an ultrasonic and colour sensors for detecting the objects.