Building Instructions -

• FLLCasts Off-season

Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.

Attachment for grabbing loops build from LEGO MINDSTORMS Robot Inventor 51515 set. We use this robot attachment to accomplish missions with loops at FIRST LEGO League. Well, we use the principle, that is what's important. Check out the attachment and the course to understand the principle of grabbing loops.

This is an pinless robot attachment designed for taking loops. It's built with LEGO MINDSTORMS Robot Inventor parts and it demonstrates how to collect a loop while moving with the robot. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. There are other attachments that are designed for taking a loop and locking it so that it does not fall, but they are more complex. Search for 'Carabiner' at FLLCasts.com

Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.

This is an Inertia triggered attachment build with a LEGO MINDSTORMS Robot Inventor 51515 set. With this attachment we can collect different parts and bring them back to base at FIRST LEGO League competitions. The principle is useful as no additional motors are required for activating this attachment. In the same time it is active which means that it moves and can change it's position in space separately from the robot.. which is useful

Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.

LEGO Attachment user for throwing/shooting a ball. It is powered with one motor and uses the fact that the parts of the LEGO set could bend. Build and experiment with it. Many FIRST LEGO League competitions have missions that could be accomplished with attachments that throw/shoot

Second version of a reusable gear attachment. This time the black gear wheel is at the top. It is useful when you are constrained by space.

Bowling pins mission model reworked from a LEGO Mindstorms EV3 version available at Bowling pins mission models. FLLCasts Off-season Challenge 2019 to a LEGO Education SPIKE Prime version available in this material. You can follow the same construction to assemble as many pins as you need. In 3D building instructions for you to construct them.

Yes, this is a single part. The whole instruction is a single part. This is not an error. This is the part that we use to demonstrate a flip attachment. For consistency even though it is a single LEGO Education SPIKE Prime part, we show the part visually, we don't just mention it in the comments.

Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.

Third version of a reusable gear attachment. In this scenario a single motor could power two different axles in two different directions. If you use it to accomplish a mission do not forget to send us a video. We would love to see it.

Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.

Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.

Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.

This attachment is a demonstration of how easy to detach attachment could be build for LEGO MINDSTORMS Robot Inventor robot where both the robot and the attachment is from the same 51515 set. The principle is useful for accomplishing missions where the mission model should be placed on the FIRST LEGO League field and in the same time should be supported in a way. Check out the tutorial for a demonstration.

This is a light shield over the color sensor. Covered from the light the color sensor is much more precise.

This is a power inventor switch mission model. The goal is to "switch" the power by moving the lever from one side to the other. This is a common mission for FIRST LEGO League competitions.

Containers mission models reworked from a LEGO Mindstorms EV3 version available at 778-containers-mission-models-fllcasts-off-season-challenge-2019 to a LEGO MINDSTORMS Robot Inventor version available in this material. In 3D building instructions for you to construct them.

This is a distance sensor attachment for Gazon 2.0, a LEGO Mindstorms Robot Inventor robot with a single sensor. This attachment is place on the robot whenever we want to work with the LEGO MINDSTORMS Robot Inventor Distance Sensor.