Building Instructions -

• FIRST LEGO League

The NXT Competition robot was the first competition robot we designed. For most of the part in 2011-2012-2013 it was working really great. Than EV3 was released

These are instructions on how to build the:

• Bridge Road

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Kiril Mitov's most favourite attachment. To quote him "I had a really great fun building this attachment and recording the videos for it".

It's an attachment with a Rubber band and a Flywheel and a Gear Wheel and a Worm Gear. So much knowledge in just one small attachment. The goal of the attachment is to be able to have an active attachment without actually having a motor. So you can place that attachment and it will do the work for you instead of using a motor to power it. 

Build with LEGO Mindstorms EV3 set. 

When placing the rubber bands check out the tutorials

Placing the white rubber band is shown at https://www.fllcasts.com/tutorials/105-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-2 at around 05:40.

Placing the red rubber band is shown at https://www.fllcasts.com/tutorials/104-rubber-band-attachment-with-a-flywheel-solving-fll-2014-search-engine-part-1 

This is an attachment that accomplishes a mission. But they all do. This attachment is special as it is a Glide pinless attachment. It teachers the principles of building attachments that could be easily glided onto the robot and allow for quick changes of different attachments. It is designed for the

This is a version of the Gazon robot that has a single color sensor and is useful for cases where you still have not purchased a second color sensor, but need to start working on the FLL competition season missions

The goal of this robot attachment is to demonstrate a principle and example for dropping an object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

In the LEGO Mindstorms Robot Inventor set there is only one color sensor. The original Gazon is build from LEGO Education SPIKE Prime where there are two light sensors. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions

A LEGO Mindstorms construction for taking loops. Uses the same principle as a carabiner.

This robot attachment could be used to throw objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate a principle and one example of an attachment for throwing. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.

This is a robot attachment that could be placed on the side of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the side of the robot. This specific robot attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.

This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

Background

Though spacecraft travel crazy-fast, even the shortest trips involve a lot of time for the traveller’s body away from labour and recreation, which is bad for the heart and lungs.

Mission

The robot needs to repeatedly move one or both of the exercise machine’s handle assemblies to make the pointer advance.

Scores

• Get the pointer tip completely in orange, or partly covering either of orange’s end-borders: 22 OR
• Get the pointer tip completely in white: 20 OR
• Get the pointer tip completely in grey, or partly covering either of grey’s end-borders: 18
• Possible scores: 0, 18, 20, 22

Scoring Requirements

• Advance the exercise machine’s pointer along its dial by moving one or both of the handle assemblies. > Only allowed method. Must be observed by the referee.
• Results must be visible at the end of the match.

Background

A space telescope is astonishing, but it can’t beat the accessibility and simplicity of a college or science museum observatory – that is, if you know how and where to point it.

Mission

Rotate the observatory to a precise direction.

Scores

• Get the pointer tip completely in orange, or partly covering either of orange’s end-borders: 20 OR
• Get the pointer tip completely in white: 18 OR
• Get the pointer tip completely in grey, or partly covering either of grey’s end-borders: 16
• Possible Scores: 0, 16, 18, 20

Scoring Requirements

• The result must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the second attachment from the series.

This is a carabiner attachment for taking loops. It is built with LEGO Education SPIKE Prime parts and it demonstrates how to successfully take loops. The goal of the attachment is to lock the loop after it catches it. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

Background

Solar panels in space are a great source of energy for a space station in the inner solar system, but since things in space are always moving, aiming the panels takes some thought.

Mission

Solar panels need to be angled toward or away from you, depending on strategy and conditions.

Scores

• Both solar panels are angled toward the same field: 22 (for both teams)

• Your solar panel is angled toward the other team’s field: 18

• Possible scores: 0, 18, 22, 40 as shown below and seen from above your north border, facing north.

“Your” solar panel is the one on your west end of the table.

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building Instructions for the 3D Cinema mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is an attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. On a robot most of the time you place attachments on the front/side/top. These instructions show how to build an attachment that could be placed on the front of the robot. The idea is to demonstrate the principle and you can expand and build a more specific attachment for the mission that you are accomplishing. Check the courses in which this attachment is used for more information and tutorials on how to use it.