Building Instructions -

• FIRST LEGO League

-

• Attachments

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.

The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It is an experiment we did that didn't work out for the FLL 2023-2024 MASTERPIECE field, but is interesting nonetheless. It shows how you can take an out-of-box robot and put a steering mechanism on it.

Dominator is a compact LEGO Mindstorms EV3 Box robot from the family of the Roller Coaster and Kiddo box robots. Similar to the previous two robots, Dominator also can move its front part up, down, left and right. This robot also has the same length of movement as its two predecessors of this type - 8 LEGO pins on the side and up.

The difference is that Dominator has fewer parts and has a perfect center of weight that allows it to use large attachments and lift heavy objects without threatening its stability. The movement on the X and Y axes has the same gear ratio. The light sensors are attached to the movable part of the robot which enables it to both follow a line and recognize the color of various object with height lower than 7 LEGO units.

The attachment helps the robot to delivers the water to the dam, releases the water in the Hydroelectric dam to produce energy, and delivers energy units to the energy storage. With this attachment, the robot accomplishes M03 ENERGY STORAGE, M11 HYDROELECTRIC DAM, and M12 WATER RESERVOIR from the FIRST LEGO League 2022-2023 SUPERPOWERED competition.

Meet Kiddo, smaller sister of Roller Coaster. It is smaller, easier to build and easier to control box robot with X-Y moving plate.

The goal of this robot is to have one complex attachment that could move in four directions. With such an attachment you can solve a lot of complex tasks without loosing time changing attachments. It is also quite sturdy and packed

This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It solves M10 Sound Mixer using a passive attachment and collects Noah, the sound engineer using an inertial attachment.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This attachment is accomplishing two missions and partly two more missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solves mission 6 - Music concert lights and sounds and mission 7 - Hologram Performance. It partially solves mission 14 - Audience delivery and mission 15 - Expert delivery by delivering Noah the Sound Engineer to the Music Concert area.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment uses rubber parts to compensate for the lack of precision in positioning the robot near the mission model. That was needed since at the time that this attachment was used, the robot had moved a long distance since its last aligning at a wall or other mission models.

Attachment frames are used on Base Robot Chassis to make it easier to add and remove attachments very fast. This frame is for the Box Robot 1. It is a single module build with LEGO Mindstorms EV3 parts and it could handle attachment on all sides. 

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

This is a frame for the SUV Box Robot. Tis frame is an adapter between the robot and the attachments. You can add-in several attachments on it and mount them on the robot simultaneously with one movement.

The frame has two locks that make the attachments stick to the robot. Also the front Knobs must not be used for very powerful activities due to jumpings, unless the frame with attachments become heavy enough to prevent any jumping of the frame.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.

This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.

Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.