Building Instructions -

• Push

Building instructions for the Wind Turbine mission model for the FIRST LEGO League 2022 competition. Find the parts in Bag 7

This attachment is part of a second version of attachments for accomplishing the M07, M08 and M15 where we have to push and collect in the FIRST LEGO League 2022-2023 competition. It is for the Kriket Box Robot and we are doing this second version to make sure there are enough examples of how to use the Kriket box robot.

The interesting part about this attachment is how it connects to the robot. The Kriket has two brown axles that are connected to the motors via a gear mechanism. The attachment is attached to these brown axles which transfer the motor movement to the attachment.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 5th mission of the FLL Cargo Connect competition.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 3rd mission of the FLL Cargo Connect competition.

We use this attachment to demonstrate the principle of an active attachment. This is an attachment activated from the motor. It has one level attached to it. It could be reused. The attachment transfers power from the motor to the end of the lever and we can accomplish missions like the Power Switch mission from the FLLCasts Off-season mission models.

This is an attachment for accomplishing missions from FIRST LEGO League 2022-2023 SUPER POWERED competition. We use this attachment additionally to another one that you can see the the lessons for this attachment. The goal is to execute the actions of Push and Collect, and this is the perfect passive attachment for this.

These are 3D Building Instructions for the Virtual Reality Artist mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment is accomplishing three missions and partly two more missions from the FIRST LEGO League 2022-2023. It is for the Chain Monster robot

3D building instructions for the Power plant mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 10

These are 3D Building Instructions for the Craft Creator mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.

This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 9th mission of the FLL Cargo Connect competition.

These are 3D building instructions for an active pinless attachment from LEGO Education SPIKE Prime set. The attachment is used along with the Gazon robot to push mission models.

This is a Kriket box robot attachment used for pushing a lever and precisely dropping energy units. It is used for FIRST LEGO League 2022-2023 SUPER POWERED mission call M03 Energy storage and M11 Hydroelectric Dam. This is a multi-purpose attachment that can do more than one thing at a time.

This is an attachment for the Chain Monster robot and it accomplished three missions that are all push and deliver. It technically is not used for the M09 dinosaur toy, but this is because the toy is on the robot while the attachment is below the robot

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is a pinless attachment for a LEGO Education SPIKE Prime robot that uses the Ultrasonic sensor. The attachment could be placed on top of the robot. As it is pinless, it is easy to quickly place and remove it.

This is a FIRST LEGO League robot attachment for the Step Counter mission from the 2020 RePlay competition. It is a pinless attachment that is optional and could be used on the robot or we can accomplish the mission without the attachment. It is better to use the attachment as this will give us a more smooth and accurate movement of the robot.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.